Basic Series Cue Repair Lathe

This repair lathe will do tips and ferrules and a lot more.  It comes with a full 48 inch bed for added stability, It has a 10 inch rack gear carriage travel, a standard bore headstock with .590 / 15mm through spindle bore, and two steady rests with bearings (one large and one small), three nylon collets and one plastic butt collet... plus a plastic plug (Button) which turns the small steady rest into a concave live center.  The carriage & cross slide assembly includes a double sided tool post with two 1/4 inch HSS cutting bits. The standard motor is a 120 VAC, 2.5 amp 250 watt motor with variable speed foot control. The lathe bed comes mounted on the melamine coated baseboard 

This machine is intended to be used for turning, light cutting, sanding and polishing, normal tip and/or ferrule replacement, replacing linen wraps and shaft maintenance and many other cue repair operations.  If you have any questions please just let me know.

Popular options include:
The optional manual speed control 
The Radius Turner, part #210 
The Modified drilling tailstock, part #150M 
The "Tip Holder" $27.50 (must be used with a 150 M tailstock)
The "Concave Live Center" $49.50 (must be used with a 150 M tailstock)